Resina Poliuretanica 2C
Photo Gallery
Click on the image to enlarge it
CHARACTERISTICS
Polyurethane Resin COMPONENT A is a water-based, colourless finish for floors that is water-thinnable. It
is designed for the varnishing and maintenance of laid floors but is suitable also for many other uses such as
kitchens, bathroom furnishings, etc.
This product is remarkable for its surface softness and for the fact that it tends not to yellow with age. The
quality is guaranteed with an excellent resistance to abrasion and commonly used chemical agents.
The product comes ready to use – if necessary it can be diluted at a max. of 5% with water. To further
improve its performance, it may be catalyzed at 10% with Polyurethane Resin COMPONENT B before
application.
It is available in three varieties: opaque, glossy and satin-finish.
Application and drying of the product must take place in ambient temperatures of not lower than 15° C with
humidity levels no higher than 80%.
The temperature of the storage room must not be lower than +5° C, and not higher than +35° C.
The product must be used within 6 months from the date of purchase.
DATI TECNICI
APPLICATION Brush, paint-roller, spray gun.
CONSUMPTION About 200 gr. In 2 coats A+B
DUST-DRY 45’ ± 5’ at 20° C in conditions of humidity not higher than 60%
TOUCH-DRY 3 hrs ± 30’ at 20° C in conditions of humidity not higher than 60%
VISCOSITY 28” (FORD 4)
POT LIFE If catalyzed with component B, the mixture can be used for up to 1 hr
± 30’ at 20° C
SOLIDS CONTENT 34%
SPECIFIC WEIGHT 1.040 (kg/lt)
