Stucco Da Vinci
Photo Gallery
Click on the image to enlarge it
Stucco Da Vinci
Stucco Da Vinci
Stucco Da Vinci - BLACK
CHARACTERISTICS
Stucco da Vinci is a decorative stucco for interiors made of slaked lime and selected inert minerals modified
with vegetable and mineral origin additives, suitable for achieving brush finishes on lime based plaster and
various bases which are opportunely prepared.
Its modern production techniques and special composition guarantee: excellent workability, easy polishing,
resistance, excellent ability to breathe, better colour performance with compatible pigments.
COMPOSITION
Slaked and lime, talcs, crystalline calcites, special vegetable and mineral additives.
APPLICATION
The product must be applied with a stainless steel brush on seasoned plaster (min. 28 days) and its
consistency checked. Do not apply on very absorbent surfaces without adequate humidification, excessively
absorbent and non-uniform plasters, must be pre-treated with a coat of FISSATIVO MINERALE s. 103 or
CRIL FIX
The substrate must be free from material which can affect product adherence (dust, dirt, grease, paints,
solvents).
For surfaces with significant traces of humidity or salt efflorescences, it is necessary to remove the
deteriorated plaster and then reapply it preferably with finishing – anti-mould products.
For application on fine mortar, new or poorly painted, flat and well-finished plasters, first sand paper and
brush the surface to eliminate the extra or non-uniform grains of sand on the surface, pre-treat the base as
described above, then apply Stucco Da Vinci with a stainless steel trowel, always in thin layers, in one or
more coats based on the desired effect and coverage, to obtain a “puntinato” effect provided by the
transparency of the surface grain, and always apply very little of the product.
The last coat must always be applied not more than 12 hours after application of the previous coats, with
cross pattern and well distributed trowel strokes and later polished with a stainless steel trowel kept
constantly clean and damp. Polishing must be done before the product is completely dry.
For applications on already painted plaster, plasterboard, chipboard or multi-layer plywood panels or plaster
finished walls, check the thickness of the surface and the adherence of the existing paint. Old synthetic paint
with poor adherence must be removed, or at least carefully brushed with a steel brush.
Remove any powder residue and then treat with a coat of Primer WALL BASE diluted at 40% - 50% with
water, then use a stainless steel trowel to apply one coat of our product MARMORINO NATURALE.
After it is completely dry, apply a first coat of Stucco Da Vinci and when it is dry, carry on with the
application of the second coat. Before the second coat of Stucco Da Vinci is completely dry, proceed with
the application of the third coat, applying and removing the product until to obtain the desired drawing.
Finally polish the surface, but it is not necessary to insist too much on passages.
YIELD
This varies based on the base and number of coats applied, generally about from 0,5 to 1Kg/sq.m.
PACKAGE
Tins of 20 Kg. and 5 Kg.
Keep the material in dry places with a temperature of more than + 5 °C.
